Manualshelf

HP VPN Firewall Appliances Attack Protection Configuration Guide

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module
101102103104105106107108109110
99
Figure 89 Configuring an FTP filtering policy
10. Configure a Telnet filtering policy:
a. Select the Telnet tab.
b. Click Add.
c. Enter the policy name telnet_policy.
d. Click Command Filtering.
e. Select command filtering entry reboot in the available filtering entry list, and then click << to
add it to the selected filtering entry list.
f. Click Apply.
Figure 90 Configuring a Telnet filtering policy