HP VPN Firewall Appliances Attack Protection Configuration Guide

101
a. From the navigation tree, select Firewall > Security Policy > Interzone Policy.
b. Click Add.
c. Select Trust as the source zone and Untrust as the destination zone.
d. Select any_address as the source IP address. In the Destination IP Address area, select the New
IP Address option and then enter destination IP address 5.5.5.5/0.0.0.0.
e. Select any_service as the service name and Permit as the filter action.
f. Select content filtering policy template template1.
g. Select the Enable the rule box to enable the rule.
h. Select the Continue to add next rule box to add another rule after finishing this one.
i. Click Apply.
Figure 93 Configuring the interzone policy referencing the template without java applet blocking
14. Configure an interzone policy for traffic from security zone Trust to security zone Untrust,
referencing the content filtering policy template with java applet blocking:
a. Select Trust as the source zone and Untrust as the destination zone.
b. Select any_address as the source IP address and destination IP address.
c. Select any_service as the service name and Permit as the filter action.
d. Select content filtering policy template template2.
e. Select the Enable the rule box to enable the rule.
f. Click Apply.