HP VPN Firewall Appliances Attack Protection Configuration Guide

122
Figure 103 Configuring ACL 2010
3. Enable strict URPF check in Zone B:
a. From the navigation tree, select Intrusion Detection > URPF Check.
The URPF configuration page appears, as shown in Figure 104.
b. Select zoneB in Security Zone.
c. Select Enable URPF.
d. Select ACL
and type 2010 in the field.
e. Select Strict in Type of Check.
f. Click Apply.
Figure 104 Configuring URPF in zoneB
Configuring Device A
1. Configure the interface IP addresses and security zones they belong to. (Details not shown.)
2. Enable strict URPF check in Zone A:
a. From the navigation tree, select Intrusion Detection > URPF Check.
The URPF configuration page appears, as shown in Figure 105.
b. Selec
t zoneA in Security Zone.
c. Select Enable URPF.
d. Selec
t Allow Default Route.
e. Select Strict in Type of Check.