HP VPN Firewall Appliances Attack Protection Configuration Guide

10
Figure 8 ICMP flood detection configuration page
2. Select a security zone.
3. In the Attack Prevention Policy area, select the Discard packets when the specified attack is
detected box. Click Apply.
If you do not select the box, the device only collects ICMP flood attack statistics.
4. In the ICMP Flood Configuration area, click Add.
Figure 9 Adding an ICMP flood detection rule
5. Configure an ICMP flood detection rule, as described in Table 3.
6. Click Apply.
Table 3 Configuration items
Item Descri
p
tion
Protected Host
f
IP Address Specify the IP address of the protected host.