HP VPN Firewall Appliances Attack Protection Configuration Guide

155
Table 38 Configuration items
Item Descri
p
tion
Service Name
Specify the service that the rule matches. On the rule's advanced configuration
page, this field only displays the service name.
Click the icon of the rule, and a page appears, where you can select a service.
IMPORTANT:
• In one policy, you cannot specify the same service for different rules.
• If you configure a rule for a child service and a rule for its child service, the rule
for the child service takes effect.
Valid Time
Configure the system to take different actions to the traffic matching the rule at
different time ranges.
On the rule list, click the icon a rule to add a time table to the Valid Time list of
the rule. You can also add a time table on page Advanced Security Prevention >
Time Table (see "Creating a time table").
Available actions include Bandwidth Control, Permit, Permit + Log, Block, Block +
Log. If you select Bandwidth Control, you must also configure the upstream
bandwidth, downstream bandwidth, or both.
Action
Upstream
Bandwidth
Set the maximum bandwidth for the upstream traffic
(destination zone to source zone) matching the
service within the specified time ranges.
IMPORTANT:
The two configuration items
are configurable when you
select the Bandwidth
Control action, and you
must configure at least one
item.
Upstream
Bandwidth
Set the maximum bandwidth for the downstream
traffic (source zone to destination zone) matching the
service within the specified time ranges.
6. Click the icon for a rule to configure the rule on the advanced rule setup page, as shown
in Figure 133.
Figure 133 Advanced configuration
7. Click the icon to add a time table-action association for the service of the rule.
You can add up to six time table-action associations for a rule. If multiple time tables overlap in
time range, the action corresponding to the one on the top is executed.
For configuration guidelines for adding a time table-action association, see the Valid Time, Action,
Upstream Bandwidth, Downstream Bandwidth fields in Table 38.
8. Click Apply on the Advanced Rule Setup page.