HP VPN Firewall Appliances Attack Protection Configuration Guide

157
Table 39 Configuration items
Item Descri
p
tion
Source Zone
Select the source zone to which to
apply the bandwidth management
policy.
IMPORTANT:
• Bandwidth management policies can be
applied only to interzone instances
(source-destination zone pairs), and in the
same zone, only one bandwidth
management policy can be applied.
• When the source zone and the destination
zone are different zones, specify the
internal trusted zone as the destination
zone and the external untrusted zone as the
source zone.
• Do not use the Management, Any, or Local
zone as the source or destination zone.
Destination Zone
Select the destination zone to
which to apply the bandwidth
management policy.
Bandwidth
Management
Policy
Select the bandwidth management policy to be applied.
To add a bandwidth management policy to the Bandwidth Management Policy list,
click the following Add button (see "Creating a bandwidth management policy").
Source IP List
Add the source IP addresses to be matched by the bandwidth management policy.
You can add up to ten host addresses or network segment addresses.
Destination IP List
Add the destination IP addresses to be matched by the bandwidth management
policy.
You can add up to ten host addresses or network segment addresses.
Excluded IP List
Add IP addresses to be excluded from the source or destination IP list of the
bandwidth management policy. The bandwidth management policy does not match
excluded IP addresses.
You can add up to ten host addresses or network segment addresses that are
included on the source or destination IP list.
Protocol audit
Feature and hardware compatibility
Hardware Protocol audit com
p
atibilit
y
F1000-A-EI/F1000-E-SI/F1000-S-AI No
F1000-C-G/F1000-S-G/F1000-A-G No
F1000-E No
F1000-S-EI No
F100-C-G/F100-S-G Yes
F100-M-G/F100-A-G/F100-E-G Yes
F5000-A5 No
F5000-S/F5000-C No