HP VPN Firewall Appliances Attack Protection Configuration Guide

163
3. Select Enable user-defined URL filtering.
4. Select one of the following processing methods for HTTP requests:
{ Drop HTTP request
{ Redirect to URL—Redirects HTTP requests to the specified URL.
You need to manually configure the target URL for redirection.
{ Return a page—Sends a response webpage to the device that sends the HTTP request.
You need to configure the webpage content to be sent by using either of the flowing methods:
− Enter the content in the field below.
− Import the content file saved on the local host. To do so, click Browse to specify the file, and
click Import.
5. Select Send logs to remote hosts.
To enable this option, you need select Log Report > Syslog, and configure the remote host address.
6. Click Apply.
Configuring an URL filtering policy
1. Select Advanced Security Prevention > URL Filtering from the navigation tree.
2. Click the URL Filtering Policies tab, as shown in Figure 141.
Figure 141 URL Filtering Policies tab
3. Click Add to enter the URL filtering policy configuration page, as shown in Figure 142.
Figure 142 Configuring an URL filtering policy
4. Configure the URL filtering policy as described in Table 42.
Table 42 Configuration items
Item Descri
p
tion
Name Configure a name for the URL filtering policy.