HP VPN Firewall Appliances Attack Protection Configuration Guide

12
Figure 10 UDP flood detection configuration page
2. Select a security zone.
3. In the Attack Prevention Policy area, select the Discard packets when the specified attack is
detected box. Click Apply.
If you do not select the box, the device only collects UDP flood attack statistics.
4. In the UDP Flood Configuration area, click Add.
Figure 11 Adding a UDP flood detection rule
5. Configure a UDP flood detection rule, as described in Table 4.
6. Click Apply.
Table 4 Configuration items
Item Descri
p
tion
Protected Host
f
IP Address Specify the IP address of the protected host.