HP VPN Firewall Appliances Attack Protection Configuration Guide

176
Configuring protocol audit
1. Configure the remote log host:
a. Select Log Report > Syslog from the navigation tree.
b. Enter the IP address of log host 1, 10.1.1.2.
c. Click Apply.
Figure 157 Configuring the remote log host
2. Configure the firewall to send protocol audit logs to the remote log host:
a. Select Advanced Security Prevention > Protocol Audit from the navigation tree.
The Protocol Audit Policies tab is displayed.
b. Select the Send logs to remote log hosts box.
c. Click Apply.