HP VPN Firewall Appliances Attack Protection Configuration Guide

27
Figure 32 Configuring global settings
Configuring blacklist
Recommended configuration procedure
Ste
p
Remarks
1. Enabling the blacklist
function
Required.
By default, the blacklist function is disabled.
2. Adding a blacklist entry
manually
Optional.
By default, no blacklist entries exist.
3. Configuring the scanning
detection feature to add
blacklist entries
automatically
Optional.
For more information about scanning detection configuration, see
"Configuring traffic abnormality detection."
By default, the scanning detect
ion feature is disabled.
4. Viewing the blacklist
Optional.
Enabling the blacklist function
1. From the navigation tree, select Intrusion Detection > Blacklist.
The blacklist management page appears, as shown in Figure 33.
2. Select Enable Blacklist.
3. Click Apply.