HP VPN Firewall Appliances Attack Protection Configuration Guide

30
Figure 36 Enabling the blacklist feature
3. Add a blacklist entry for Host D:
a. In the Blacklist Configuration area, click Add.
b. On the page that appears (see Figure 37), enter the IP address 5.
5.5.5, select Perm
anence.
c. Click Apply.
Figure 37 Adding a blacklist entry for Host D
d. In the Blacklist Configuration area, click Add again.
e. On the page that appears (see Figure 38), enter the IP address 192.168.1.5, selec
t Hold Time
and set the lifetime of the entry to 50 minutes.
f. Click Apply.
Figure 38 Adding a blacklist entry for Host C
4. Configure scanning detection for the untrusted zone, as shown in Figure 39:
a. From the navigation tree, select Intrusion Detection > Traffic Abnormality > Scanning
Detection.
b. Select the security zone Untrust.
c. Select Enable Scanning Detection.