HP VPN Firewall Appliances Attack Protection Configuration Guide

90
4. Configure the FTP filtering policy, as described in Table 21.
5. Click Apply.
Table 21 Configuration items
Item Descri
p
tion
Name Specify the name for the FTP filtering policy.
Command Filtering
Select the filtering entries to be used for
command word filtering.
IMPORTANT:
• Packets that match these
filtering conditions will be
dropped.
• You must configure at least
one of these items.
Upload Filename Filtering
Select the filtering entries to be used for
upload filename filtering.
Download Filename Filtering
Select the filtering entries to be used for
download filename filtering.
Enable Logging
Specify whether to log packet matching events.
IMPORTANT:
The logging function takes effect only when it is enabled in both the content
filtering policy and the interzone policy.
Configuring a Telnet filtering policy
1. From the navigation tree, select Identification > Content Filtering > Filtering Policy.
2. Select the Telnet Policy tab to enter the Telnet filtering policy list page.
Figure 76 Telnet filtering policy list
3. Click Add to enter the page for adding a Telnet filtering policy, as shown in Figure 77.
Figure 77 Adding a Telnet filtering policy
4. Configure the Telnet filtering policy, as described in Table 22.
5. Click Apply.