HP VPN Firewall Appliances Getting Started Command Reference

100
The time ID (time-id) must be unique in a job. If two time and command bindings have the same time ID,
the binding configured most recently takes effect.
Changing a clock setting does not affect the schedule set by using the time delay command.
Use Table 21
when you add commands in a job.
Table 21 Command schedule options
Command Descri
p
tion
time timeid one-off delay time2 command
command
Schedules a command to run after a delay time.
The command runs only once.
time timeid repeating delay time2
command command
Schedules a command to run every the delay time.
NOTE:
• The commands in a scheduled job must be in the same view.
• Every job can have up to 10 commands.
• The time ID (
time-id ) must be unique in a job. If two time and command bindin
g
s have the same time
ID, the binding configured most recent takes effect.
• Changing a clock setting does not affect the schedule set by using the time delay command.
Examples
# Save the configuration file five minutes later.
<Sysname> system-view
[Sysname] job saveconfig
[Sysname-job-saveconfig] view monitor
[Sysname-job-saveconfig] time 1 one-off delay 5 command save a.cfg
# Save the configuration file every five minutes.
<Sysname> system-view
[Sysname] job saveconfig
[Sysname-job-saveconfig] view monitor
[Sysname-job-saveconfig] time 1 repeating delay 5 command save a.cfg
Related commands
• job
• view
transceiver phony-alarm-disable
Use transceiver phony-alarm-disable to disable alarm traps for transceiver modules.
Use undo transceiver phony-alarm-disable to restore the default.
Syntax
transceiver phony-alarm-disable
undo transceiver phony-alarm-disable