HP VPN Firewall Appliances Getting Started Command Reference

101
Default
Alarm traps are enabled for transceiver modules.
Views
System view
Default command level
3: Manage level
Usage guidelines
If you install a transceiver module whose vendor name is not HP, the system repeatedly outputs traps and
logs to notify you to replace the module. To continue to use such a transceiver module that is
manufactured or customized by HP but has no vendor information, you can disable alarm traps so that
the system stops outputting alarm traps.
Examples
# Disable alarm traps for transceiver modules.
<Sysname> system-view
[Sysname] transceiver phony-alarm-disable
view
Use view to specify a view for a job.
Use undo view to remove the view of a job.
Syntax
view view-name
undo view
Default
No view is specified for a job.
Views
Job view
Default command level
3: Manage level
Parameters
view-name: Specifies a view in which commands in the job run. A view name is a string of 1 to 90
characters.
Usage guidelines
Every job can have only one view. If you specify multiple views, the view specified most recently takes
effect.
Enter a view name in its complete form and make sure the view name is available on the device. Most
commonly used view names include monitor for user view, system for system view, GigabitEthernet
x/x
for Ethernet interface view, and Vlan-interface
x for VLAN interface view.
Examples
# Specify system view for the job creatvlan.