HP VPN Firewall Appliances Getting Started Command Reference

11
49:UXXX X
2 character mode users. (U)
52 UI never used. (X)
2 total UI in use
Table 4 Command output
Field Descri
p
tion
0:U
0 represents the absolute number of the user interface. If the user interface is not used,
an X is displayed. If the user interface is in use, a U is displayed. For example, 49:UXXX
X shows that the absolute number of the first user interface is 49, and the user interface
is in use. User interfaces from 50 to 52 are not in use.
display users
Use display users to display information about the user interfaces being used.
Use display users all to display information about all user interfaces supported by the device.
Syntax
display users [ all ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all: Displays information about all user interfaces the device supports.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the chapter on CLI in Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about the user interfaces being used.
<Sysname> display users
The user application information of the user interface(s):
Idx UI Delay Type Userlevel
0 CON 0 00:02:47 3
+ 49 VTY 0 00:00:00 TEL 3
Following are more details.
VTY 0 :
Location: 192.168.0.214