HP VPN Firewall Appliances Getting Started Command Reference

22
Usage guidelines
Verify that the port number is not used by another service, because this command does not check for
conflicts with configured port numbers.
Examples
# Configure the port number of the HTTPS service as 6000.
<Sysname> system-view
[Sysname] ip https port 6000
Related commands
display ip https
ip https ssl-server-policy
Use ip https ssl-server-policy to associate the HTTPS service with an SSL server-end policy.
Use undo ip https ssl-server-policy to remove the association.
Syntax
ip https ssl-server-policy policy-name
undo ip https ssl-server-policy
Default
The HTTPS service is not associated with any SSL server-end policy, and the device uses a self-signed
certificate for authentication. (A self-signed certificate is generated and signed by the device itself, rather
than the CA.)
Views
System view
Default command level
3: Manage level
Parameters
policy-name: Name of an SSL server policy, a string of 1 to 16 characters.
Usage guidelines
The HTTPS service can be enabled only after this command is configured successfully.
With the HTTPS service enabled, you cannot modify the associated SSL server-end policy or remove the
association between the HTTPS service and the SSL server-end policy after the HTTPS service is enabled.
Examples
# Associate the HTTPS service with SSL server-end policy myssl.
<Sysname> system-view
[Sysname] ip https ssl-server-policy myssl
Related commands
• display ip https
• ssl server-policy (Network Management Command Reference)