HP VPN Firewall Appliances Getting Started Command Reference

23
lock
Use lock to lock the current user interface.
Syntax
lock
Default
This function is disabled.
Views
User view
Default command level
3: Manage level
Usage guidelines
When you must leave the device for a while, use this command to lock the current user interface to
prevent unauthorized access.
After you enter this command, you are asked to enter a password (up to 16 characters) and then confirm
it by entering the password again.
To unlock the user interface, press Enter and enter the correct password.
This command is not supported in FIPS mode.
Examples
# Lock the current user interface and then unlock it.
<Sysname> lock
Please input password<1 to 16> to lock current user terminal interface:
Password:
Again:
locked !
Password:
<Sysname>
parity
Use parity to specify a parity check mode.