HP VPN Firewall Appliances Getting Started Command Reference

33
Parameters
remote-host: Specifies the IP address or host name of a remote host, a case-insensitive string of 1 to 46
characters.
-i interface-type interface-number: Specifies the outbound interface for sending Telnet packets. This
option is required when the destination address is a link-local address.
port-number: Specifies the TCP port number for the Telnet service on the remote host. It ranges from 0 to
65535 and defaults to 23.
vpn-instance vpn-instance-name: Specifies the VPN that the remote host belongs to, where
vpn-instance-name is a case-sensitive string of 1 to 31 characters. If the remote host is on the public
network, do not specify this option.
Usage guidelines
To terminate the current Telnet connection, press Ctrl+K or execute the quit command.
This command is not supported in FIPS mode.
Examples
# Telnet to the host at 5000::1.
<Sysname> telnet ipv6 5000::1
telnet server enable
Use telnet server enable to enable the Telnet server function.
Use undo telnet server enable to disable the Telnet server function.
Syntax
telnet server enable
undo telnet server enable
Default
The Telnet server function is disabled.
Views
System view
Default command level
3: Manage level
Usage guidelines
This command is not supported in FIPS mode.
Examples
# Enable the Telnet server function.
<Sysname> system-view
[Sysname] telnet server enable
terminal type
Use terminal type to specify the terminal display type.