HP VPN Firewall Appliances Getting Started Command Reference

37
Views
User view
Default command level
3: Manage level
Parameters
verification-code: Fixed verification code for Web login, a case-sensitive 4-character string.
Usage guidelines
If you configure the web captcha command multiple times, the most recent configuration takes effect.
After you configure a fixed verification code for Web login, a Web user can use the code for login,
without caring about the verification code displayed on the login page. This feature is intended for test
environments where a script is usually used for Web function tests. Eliminating the requirement for
entering the verification code every time, this feature helps improve the test efficiency.
For Web access security, do not use this feature in production environments.
This command is not saved to the configuration file and cannot survive a reboot.
Examples
# Specify a fixed verification code for Web login
<Sysname> web captcha test
web https-authorization mode
Use web https-authorization mode to specify the authentication mode for users trying to log in to the
device through HTTPS.
Use undo web https-authorization mode to restore the default.
Syntax
web https-authorization mode { auto | manual }
undo web https-authorization mode
Default
A user must enter correct username and password to log in through HTTPS.
Views
System view
Default command level
2: System level
Parameters
auto: Uses the PKI certificates of HTTPS users to automatically authenticate them.
manual: Provides a login page for HTTPS users to enter the correct username and password.
Usage guidelines
When the auto mode is enabled: