HP VPN Firewall Appliances Getting Started Command Reference

40
OAP module commands
The commands described in this chapter are applicable to only the following network devices when a
firewall module is installed: HP 5800, HP 7500, HP 9500, HP 10500, and HP 12500.
Unless otherwise noted, the term "OAP module" refers to the firewall module throughout this chapter.
The following matrix shows the feature and hardware compatibility:
Hardware Com
p
atibilit
y
F1000-A-EI/F1000-S-EI No
F1000-E No
F5000 No
F5000-S/F5000-C No
VPN firewall modules Yes
20-Gbps VPN firewall modules Yes
oap connect
Use oap connect to access the CLI of the OAP module from the device.
Syntax
In standalone mode:
oap connect slot slot-number
In IRF mode:
oap connect chassis chassis-number slot slot-number
Views
User view
Default command level
1: Monitor level
Parameters
slot slot-number: Specifies an OAP module by its slot number. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies an OAP module on an IRF member device. (In IRF
mode.)
Usage guidelines
To return to the device's CLI, press Ctrl+K.
Examples
# In standalone mode, access the CLI of the OAP module in slot 3 from the device.
<Sysname> oap connect slot 3