HP VPN Firewall Appliances Getting Started Command Reference

41
Press CTRL+K to quit.
Connected to OAP!
# In IRF mode, access the CLI of the OAP module in slot 5 on member device 2.
<Sysname> oap connect chassis 2 slot 5
Press CTRL+K to quit.
oap management-ip
Use oap management-ip to configure the management IP address of an OAP module on the device.
Use undo oap management-ip to restore the default.
Syntax
In standalone mode:
oap management-ip ip-address slot slot-number
undo oap management-ip slot slot-number
In IRF mode:
oap management-ip ip-address chassis chassis-number slot slot-number
undo oap management-ip slot chassis chassis-number slot slot-number
Default
The device is not configured with the management IP address of a firewall module.
Views
System view
Default command level
2: System level
Parameters
slot slot-number: Specifies an OAP module by its slot number. (In standalone mode.)
ip-address: Specifies the management IP address of the OAP module. This address must be configured
on the OAP module.
chassis chassis-number slot slot-number: Specifies an OAP module on an IRF member device. (In IRF
mode.)
Usage guidelines
To use an NMS to manage an OAP module, you must configure the management IP address of the OAP
module on the device.
Support for this command depends on the model of the network device.
Examples
# In standalone mode, configure the management IP address of the OAP module in slot 3 on the device.
<Sysname> System-view
[Sysname] oap management-ip 1.1.1.1 slot 3
# In IRF mode, configure the management IP address of the OAP module in slot 5 on member device 2.
<Sysname> System-view
[Sysname] oap management-ip 1.1.1.1 chassis 2 slot 5