HP VPN Firewall Appliances Getting Started Command Reference

ACSEI commands

The following matrix shows the feature and hardware compatibility:

Hardware Com

atibilit

F1000-A-EI/F1000-S-EI No

F1000-E No

F5000 No

F5000-S/F5000-C No

VPN firewall modules Yes

20-Gbps VPN firewall modules Yes

ACSEI server commands

The commands in this section apply to the network device.

acsei client close

Use acsei client close to close an ACSEI client.

Syntax

acsei client close client-id

Views

ACSEI server view

Default command level

2: System level

Parameters

client-id: Specifies the ID of the ACSEI client to be closed. An ACSEI client ID is assigned by the ACSEI

server. The value range depends on the device model.

Usage guidelines

After this command is executed, the ACSEI server sends a close notification to the specified ACSEI client,

and the client will execute the close operation after receiving the packet.

This command is available only for a Linux-based ACSEI client.

Examples

# Close ACSEI client 1.

<Sysname> system-view

[Sysname] acsei server

[Sysname-acsei-server] acsei client close 1