HP VPN Firewall Appliances Getting Started Command Reference

49
Default command level
2: System level
Usage guidelines
You can enable ACSEI client on only one interface on the firewall module. However, you can enable
ACSEI client on the firewall card and the network device at the same time.
Examples
# Enable ACSEI client on interface Ten-GigabitEthernet 0/0.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 0/0
[Sysname-Ten-GigabitEthernet0/0] acsei-client enable
display acsei-client information
Use display acsei-client information to display ACSEI client information.
Syntax
display acsei-client information [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the chapter on CLI in Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display ACSEI client information.
<Sysname> display acsei-client information
Client Description: SecBlade FW
Hardware: A.0
System Software: COMWAREV500R002B108D005
Application Software: V300R002B01D804
CPU: RMI XLR732 1000MHz
PCB Version: A.0
CPLD Version: 3.0
Bootrom Version: Basic BootRom Version:1.28,Extend BootRom Version:1.50
CF card: 247M Bytes Compact Flash Storage Device
Memory: 3584M Bytes DDR2 SDRAM Memory
Harddisk: