HP VPN Firewall Appliances Getting Started Command Reference

51
Device management commands
The following matrix shows the storage media supported on different firewalls and firewall modules:
Hardware Stora
g
e medium
F1000-A-EI/F1000-S-EI flash0
F1000-E cfa0
F5000 cfa0
F5000-S/F5000-C cfa0
VPN firewall modules cfa0
20-Gbps VPN firewall modules cfa0
All examples in this chapter use the storage medium cfa0.
clock datetime
Use clock datetime to set the system time and date.
Syntax
clock datetime time date
Views
User view
Default command level
3: Manage level
Parameters
time: Specifies a time, in the hh:mm:ss format. The hh value is in the range of 00 to 23, the mm value is
in the range of 00 to 59, and the ss value is in the range of 00 to 59. Zeros can be omitted, unless you
specify 00:00:00.
date: Specifies a date, in the MM/DD/YYYY or YYYY/MM/DD format. The YYYY value is in the range
of 2000 to 2035, the MM value is in the range of 1 to 12, and the DD value is in the range of 1 to 31.
Usage guidelines
You can leave the ss field blank when you specify the time parameters.
Examples
# Set the current system time to 14:10:20 08/01/2005.
<Sysname> clock datetime 14:10:20 8/1/2005
# Set the current system time to 00:06:00 01/01/2007.
<Sysname> clock datetime 0:6 2007/1/1
Related commands
• clock summer-time one-off