HP VPN Firewall Appliances Getting Started Command Reference

56
Usage guidelines
Two users are allowed to enter system view by default.
If multiple users enter system view to configure certain attribute, the most recent configuration applies.
When the number of users has already reached the limit, other users can not enter system view.
Examples
# Configure to allow up to four users to enter system view concurrently.
<Sysname> system-view
[Sysname] configure-user count 4
Related commands
display configure-user
copyright-info enable
Use copyright-info enable to enable displaying the copyright statement.
Use undo copyright-info enable to disable displaying the copyright statement.
Syntax
copyright-info enable
undo copyright-info enable
Default
This feature is enabled.
Views
System view
Default command level
3: Manage level
Examples
# Enable displaying the copyright statement.
<Sysname> system-view
[Sysname] copyright-info enable
• When a Telnet user logs in, the following statement appears:
***************************************************************************
* Copyright (c) 20010-2013 Hewlett-Packard Development Company, L.P. *
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
***************************************************************************
<Sysname>
• When a console user quits user view, the following message appears:
**************************************************************************
* Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P. *
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *