HP VPN Firewall Appliances Getting Started Command Reference

2
* no decompiling or reverse-engineering shall be allowed. *
******************************************************************************
User interface con0 is available.
Please press ENTER.
3. Press Enter.
Pressing Enter does not start a session.
4. Enter s.
A terminal session is started.
<Sysname>
%Mar 2 18:40:27:981 2005 Sysname SHELL/5/LOGIN: Console login from con0
authentication-mode
Use authentication-mode to set the authentication mode for a user interface.
Use undo authentication-mode to restore the default.
Syntax
In non-FIPS mode:
authentication-mode { none | password | scheme }
undo authentication-mode
In FIPS mode:
authentication-mode scheme
undo authentication-mode
Default
The authentication mode is password for VTY user interfaces and none for the console user interface.
In FIPS mode, the authentication mode must be scheme.
Views
User interface view
Default command level
3: Manage level
Parameters
none: Performs no authentication.
password: Performs local password authentication.
scheme: Performs AAA authentication. For more information about AAA, see Access Control
Configuration Guide.