HP VPN Firewall Appliances Getting Started Command Reference

66
Hardware Value ran
g
e
F1000-A-EI/F1000-S-EI 0, indicates the PCB.
F1000-E 0, indicates the PCB.
F5000
0 to 4, 0 for the MPU and 1 to 4 for a service
card.
F5000-S/F5000-C 0, indicates the PCB.
VPN firewall modules 0, indicates the firewall module itself.
20-Gbps VPN firewall modules 0, indicates the firewall module itself.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the chapter on CLI in Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
An electronic label is a profile of a device or card and contains the permanent configuration including
the serial number, manufacturing date, MAC address, and vendor name. The data is written to the
storage component during debugging or testing.
This command displays part of the electronic label data.
Examples
# Display the electronic label data for the device.
<Sysname> display device manuinfo
Slot 0:
slot 0
DEVICE_NAME:F5000-S
DEVICE_SERIAL_NUMBER: 210235A0VR0000000001
MAC_ADDRESS: 0000-EEEE-2200
MANUFACTURING_DATE: 2013-04-09
VENDOR_NAME:HP .
display diagnostic-information
Use display diagnostic-information to display or save running status data for multiple feature modules.
Syntax
display diagnostic-information [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level