HP VPN Firewall Appliances Getting Started Command Reference

74
Table 13 Command output
Field Descri
p
tion
System Total Memory(bytes) Total size of the system memory (in bytes)
Total Used Memory(bytes) Size of the memory used (in bytes)
Used Rate Percentage of the memory used to the total memory.
display power
Use display power to display power supply information.
Syntax
display power [ power-id ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
power-id: Displays information about the specified power supply, where power-id represents the power
supply number..
The following matrix shows the value range for the power-id argument on different firewalls and firewall
modules:
Hardware Value ran
g
e
F1000-A-EI/F1000-S-EI 1 to 2
F1000-E 1
F5000 1 to 2
F5000-S/F5000-C 1 to 2
VPN firewall modules No power supply (this command is not supported)
20-Gbps VPN firewall modules No power supply (this command is not supported)
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the chapter on CLI in Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display power supply information.
<Sysname> display power
Power Information: