HP VPN Firewall Appliances Getting Started Command Reference

75
Power 1 Status: Normal
display reboot-type
Use display reboot-type to display the mode of the last reboot.
Syntax
display reboot-type [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
2: System level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the chapter on CLI in Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no subcard is specified, this command displays the mode of the last reboot of the device.
Examples
# Display the mode of the last reboot.
<Sysname> display reboot-type
The rebooting type this time is: Cold
The output shows that the last reboot mode is Cold boot (cold boot will restart a device by powering it on).
(The display of Warm represents a warm boot, which means to restart a device by using the commands
like reboot).
display rps
Use display rps to display RPS status information.
Syntax
display rps [ rps-id ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
rps-id: Displays the status of the specified RPS, where rps-id represents the RPS number and must be 2.