HP VPN Firewall Appliances Getting Started Command Reference

83
specifies an interface by its type and number. If no interface is specified, this command displays the
measured values of the digital diagnosis parameters for the transceiver modules in all interfaces.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the chapter on CLI in Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the measured values of the digital diagnosis parameters for the transceiver module in interface
GigabitEthernet 0/2.
<Sysname> display transceiver diagnosis interface gigabitethernet 0/2
GigabitEthernet0/2 transceiver diagnostic information:
Current diagnostic parameters:
Temp(°C) Voltage(V) Bias(mA) RX power(dBM) TX power(dBM)
36 3.31 6.13 -35.64 -5.19
Table 18 Command output
Field Descri
p
tion
transceiver diagnostic information Digital diagnosis information of the transceiver in the interface.
Current diagnostic parameters Current diagnostic parameters.
Temp.(°C)
Digital diagnosis parameter-temperature, in °C, with the precision to
1°C.
Voltage(V) Digital diagnosis parameter-voltage, in V, with the precision to 0.01 V.
Bias(mA)
Digital diagnosis parameter-bias current, in mA, with the precision to
0.01 mA.
RX power(dBM)
Digital diagnosis parameter-RX power, in dBM, with the precision to
0.01 dBM.
TX power(dBM)
Digital diagnosis parameter-TX power, in dBM, with the precision to
0.01 dBM.
display transceiver manuinfo
Use display transceiver manuinfo to display the electronic label data for transceiver modules.
Syntax
display transceiver manuinfo interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
2: System level