HP VPN Firewall Appliances Getting Started Command Reference

88
Views
System view
Default command level
3: Manage level
Parameters
primary: Specifies the primary monitored interface.
secondary: Specifies the secondary monitored interface.
interface-type interface-number: Type and number of the interface to be monitored.
Usage guidelines
If you configure only the primary monitored interface or the secondary monitored interface, the device
monitors the IP address of the configured interface. If the interface gets or changes its IP address when
the interface status is up, the device sends traps to the NMS to inform it of the available IP address.
If you configure both the primary and secondary monitored interfaces, the device monitors the primary
one first.
The following matrix shows the nms monitor-interface command and hardware compatibility:
Hardware Com
p
atibilit
y
F1000-A-EI/F1000-S-EI Yes
F1000-E No
F5000 No
F5000-S/F5000-C No
VPN firewall modules No
20-Gbps VPN firewall modules No
Examples
# Configure GigabitEthernet 0/1 as the primary monitored interface.
<Sysname> system-view
[Sysname] nms primary monitor-interface gigabitethernet 0/1
reboot
Use reboot to reboot the device or the specified subcard.
Syntax
reboot
Views
User view
Default command level
3: Manage level