HP VPN Firewall Appliances Getting Started Guide

Scheduled job configuration example

Network requirements

Configure scheduled jobs on the firewall to enable interfaces GigabitEthernet 0/1, GigabitEthernet 0/2,

and GigabitEthernet 0/3 at 8:00 and disabled them at 18:00 on working days every week, to control

the access of the PCs connected to these interfaces.

Figure 71 Network diagram

Configuration procedure

# Enter system view.

<Sysname> system-view

# Create a job named pc1, and enter its view.

[Sysname] job pc1

# Configure the job to be executed in the view of GigabitEthernet 0/1.

[Sysname-job-pc1] view gigabitethernet 0/1

# Configure the firewall to enable GigabitEthernet 0/1 at 8:00 on working days every week.

[Sysname-job-pc1] time 1 repeating at 8:00 week-day mon tue wed thu fri command undo

shutdown

# Configure the firewall to shut down GigabitEthernet 0/1 at 18:00 on working days every week.

[Sysname-job-pc1] time 2 repeating at 18:00 week-day mon tue wed thu fri command shutdown

[Sysname-job-pc1] quit

# Create a job named pc2, and enter its view.

[Sysname] job pc2

# Configure the job to be executed in the view of GigabitEthernet 0/2.

[Sysname-job-pc2] view gigabitethernet 0/2

# Configure the firewall to enable GigabitEthernet 0/2 at 8:00 on working days every week.

[Sysname-job-pc2] time 1 repeating at 8:00 week-day mon tue wed thu fri command undo

shutdown

# Configure the firewall to shut down GigabitEthernet 0/2 at 18:00 on working days every week.

[Sysname-job-pc2] time 2 repeating at 18:00 week-day mon tue wed thu fri command shutdown

[Sysname-job-pc2] quit

# Create a job named pc3, and enter its view.