HP VPN Firewall Appliances Getting Started Guide

41
Ste
p
Command Remarks
2. Enter one or more AUX user
interface view.
user-interface aux first-number
[ last-number ]
N/A
3. Enable none authentication
mode.
authentication-mode none
By default, password
authentication is enabled for AUX
login users.
4. Configure common settings
for AUX login.
See "Configuring common settings
for AUX login (optional)."
Optional.
The next time you attempt to log in through the AUX port, you do not need to provide any username or
password, as shown in Figure 36.
Figure 36 Accessing the CLI through the AUX port without authentication
Configuring password authentication for AUX login
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter one or more AUX user
interface views.
user-interface aux first-number
[ last-number ]
N/A
3. Enable password
authentication.
authentication-mode password
By default, password
authentication is enabled but no
password is configured. To access
the device through the AUX port,
you must configure a password for
authentication.
4. Set a password.
set authentication password
{ cipher | simple } password
By default, no password is set.
5. Configure common settings
for AUX login.
See "Configuring common settings
for AUX login (
optional)."
Optional.