HP VPN Firewall Appliances Getting Started Guide

47
3. If the PC is off, turn on the PC.
4. Launch the terminal emulation program and configure the communication properties on the PC.
Figure 40 through Figure 42 show the
configuration procedure on Window
s XP HyperTerminal.
Make sure the port settings are the same as the common AUX port settings on the device. If the
default settings are used, see Table 9.
On Windows Server 2003, add the HyperTerminal program first, and then log in to and manage
the device as described in this document. On Windows Server 2008, Windows 7,
Windows Vista,
or some other operating system, obtain a third-party terminal control program first, and then follow
the user guide or online help of that program to log in to the device.
Figure 40 Connection description
Figure 41 Specifying the serial port used to establish the connection