HP VPN Firewall Appliances Getting Started Guide

53
3. Click the icon for the default account admin and confirm the operation.
Web interface
The Web interface includes three parts: navigation tree, title area, and body area.
Figure 47 Web interface
(1) Navigation area (2) Body area (3) Title area
• Navigation area—Web-based network management function menus in the form of a navigation
tree, where you can select function menus as needed. The result is displayed in the body area.
• Body area—Area where you can configure and display a function.
• Title area—Includes two parts:
{ On the left, the path of the current configuration interface in the navigation area is displayed.
{ On the right, the following buttons are provided:
− Save button for quickly saving the current configuration.
− Help button for displaying help information.
− Logout button for logging out of the Web interface.
− Raise Privilege button for entering a super password to change the current user privilege
level to the management level. This button is available only for management level users. To
set the super password, use the super password command.
Configuring Web login
To enable Web login, log in through the console port, and perform the following configuration tasks:
• Enable HTTP or HTTPS service.
• Configure the IP address of a Layer 3 interface, and make sure the interface and the configuration
terminal can reach each other.
• Configure a local user account for Web login.
The device supports HTTP 1.0 and HTTPS for transferring webpage data across the Internet.