HP VPN Firewall Appliances Getting Started Guide
69
Logging in to the firewall module from the
network device
Feature and hardware compatibility
Hardware Feature
com
p
atibilit
y
F1000-A-EI/F1000-S-EI No
F1000-E No
F5000 No
F5000-S/F5000-C No
VPN firewall modules Yes
20-Gbps VPN firewall modules Yes
This chapter describes how to log in to the firewall module from the network device. Other login methods
for the firewall module are the same as a firewall.
Logging in to the firewall module from the network
device
Before logging in to the firewall module from the network device, you must configure the AUX user
interface of the firewall module.
To configure the AUX user interface:
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enter AUX user interface
view.
user-interface aux first-number
[ last-number ]
N/A
3. Specify the none
authentication mode.
authentication-mode none
By default, the AUX user interface uses
password authentication.
4. Configure the user
privilege level.
user privilege level level
0 by default. HP recommends you set
it to 3.