HP VPN Firewall Appliances Getting Started Guide

79
Figure 60 Basic configuration wizard—4/6 (interface IP address configuration)
8. Assign IP addresses to the interfaces.
Table 13 Configuration items
Item Descri
p
tion
IP Configuration
Set the approach for obtaining the IP address,
including:
• None—The IP address of the interface is not
specified. The interface has no IP address.
• Static Address—Specify the IP address for the
interface manually. If you select this item, specify
both the IP address and the mask.
• DHCP—The interface obtains an IP address
automatically through the DHCP protocol.
• Do not change—The IP address of the interface
does not change.
IMPORTANT:
Modification to the
interface IP address
results in disconnection
with the device, so
make changes with
caution.
IP Address
If you select Stack Address as the approach for
obtaining the IP address, set the interface IP address
and network mask.
Mask
9. Click Next.
The page for configuring NAT appears.