HP VPN Firewall Appliances Getting Started Guide

81
Item Descri
p
tion
External IP: Port
When you enable the internal server, set the valid IP address and service port
number for the external access.
Internal IP: Port
If you enable the internal server, set the IP address and service port number for
the server on the internal LAN.
11. Click Next.
The page listing all configurations you have made in the basic configuration wizard appears.
Figure 62 Basic configuration wizard—6/6
On this page, you can set whether to save the current configuration to the startup configuration file
(which can be .cfg or .xml file) for the next device boot when you submit the configurations.
12. Click Finish to confirm the configurations.
To modify your configuration, click Back to go back to the previous page.
Performing basic configuration at the CLI
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Change the device
name.
sysname sysname
Optional.
HP by default.
3. Enable the Telnet
service.
telnet server enable
Optional.
Disabled by default.