HP VPN Firewall Appliances Getting Started Guide

3
• Support for management by its own Web-based management system or by IMC.
The F1000-E uses a multi-core processor and provides the following interfaces:
• Four combo interfaces, for fiber/copper port switching.
• Two high-speed interface module (HIM) expansion slots, which support the following interface
modules: 4GBE, 8GBE, HIM-1EXP, and 4GBP.
Appearance
Figure 3 Front view
(1)
A
C power switch (ON/OFF) (2) RPS receptacle (RPS)
(3) CF card slot (CF CARD) (4) Device-mode USB port 1 (USB 1)
(5) Host-mode USB port 0 (USB 0) (6) Console port (CONSOLE)
(7)
A
UX port (AUX) (8)
A
C-input power receptacle (
–
100 to 240 VAC @ 50 or 60 Hz; 2.5 A)
Figure 4 Rear view
(1) Groundin
g
screw and si
g
n (2) Combo interfaces (0 to 3)
(3) Interface module slot 2 (4) Interface module slot 1
F5000
Overview
The F5000 provides security protection for large enterprises, carriers, and data centers. It adopts
multi-core multi-threaded and ASIC processors to construct a distributed architecture, which allows for the
separation of the system management and service processing, making it a firewall that has the highest,
distributed security processing capability.
The F5000 supports the following functions and features: