HP VPN Firewall Appliances High Availability Command Reference

96
Default
No domain name is configured.
Views
DNS operation view
Default command level
2: System level
Parameters
domain-name: Specifies the domain name to be resolved. It is a case-insensitive string separated by dots
(.), each part consisting of 1 to 63 characters. The total length must be within 255 characters. Valid
characters in a part include letters, digits, hyphens (-), and underscores (_).
Examples
# Set the domain name domain1 to be resolved.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type dns
[Sysname-nqa-admin-test-dns] resolve-target domain1
route-option bypass-route
Use route-option bypass-route to enable the routing table bypass function to test the direct connectivity
to the direct destination.
Use undo route-option bypass-route to disable the routing table bypass function.
Syntax
route-option bypass-route
undo route-option bypass-route
Default
The routing table bypass function is disabled.
Views
DLSw operation view, DNS operation view, FTP operation view, HTTP operation view, ICMP echo
operation view, SNMP operation view, TCP operation view, UDP echo operation view, UDP jitter
operation view, voice operation view
Default command level
2: System level
Usage guidelines
When the routing table bypass function is enabled, the routing table is not searched, and the packet is
sent directly to the destination in a directly connected network.
Examples
# Enable the routing table bypass function.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo