HP VPN Firewall Appliances High Availability Command Reference

109
Ethernet link aggregation commands
The device does not support the dynamic aggregation mode.
default
Use default to restore the default settings for an aggregate interface or subinterface.
Syntax
default
Views
Layer 2 aggregate interface view, Layer 2 aggregate subinterface view, Layer 3 aggregate interface view,
Layer 3 aggregate subinterface view
Default command level
2: System level
Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command when you execute it on a live network.
This command might fail to restore the default settings for some commands for reasons such as command
dependencies and system restrictions. Use the display this command in interface view to identify these
commands, and then use their undo forms or follow the command reference to individually restore their
default settings. If your restoration attempt still fails, follow the error message instructions to resolve the
problem.
Examples
# Restore the default settings for Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] default
This command will restore the default settings. Continue? [Y/N]:y
description
Use description to set a description for an interface. For example, you can include information such as
the purpose of the interface for the ease of management.
Use undo description to restore the default setting.
Syntax
description text
undo description