HP VPN Firewall Appliances High Availability Command Reference

112
Link: ADM - administratively down; Stby - standby
Speed or Duplex: (a)/A - auto; H - half; F - full
Type: A - access; T - trunk; H - hybrid
Interface Link Speed Duplex Type PVID Description
BAGG1 DOWN auto A A 1
# Display brief information about Layer 3 aggregate interface Route-Aggregation 1.
<Sysname> display interface route-aggregation 1 brief
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
RAGG1 DOWN DOWN --
# Display information about all Layer 2 aggregate interfaces in DOWN state.
<Sysname> display interface bridge-aggregation brief down
The brief information of interface(s) under bridge mode:
Link: ADM - administratively down; Stby - standby
Interface Link Cause
BAGG1 DOWN Not connected
# Display information about all Layer 3 aggregate interfaces in DOWN state.
<Sysname> display interface route-aggregation brief down
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Interface Link Cause
RAGG1 DOWN Not connected
Table 25 Command output
Field Descri
p
tion
Bridge-Aggregation1/Route-Aggr
egation1 current state
Layer 2/Layer 3 interface status:
• DOWN (Administratively)—The interface is administratively shut
down with the shutdown command.
• DOWN—The interface is administratively up but physically down
(possibly because no physical link is present or the link is faulty).
• UP—The Ethernet interface is both administratively and physically up.
Unknown-speed mode,
unknown-duplex mode
The interface speed and duplex mode are unknown.
PVID Port VLAN ID.
Last clearing of counters
Time when the reset counters interface command was last used to clear
the interface statistics.
Never indicates the reset counters interface command has never been
used on the interface since the device's startup.
Last 300 seconds input/output Average input/output rate over the last 300 seconds.
Input/Output (total) Statistics of all packets received/sent on the interface.
Input/Output (normal) Statistics of all normal packets received/sent on the interface.
Line protocol current state Link layer state of the interface.