HP VPN Firewall Appliances High Availability Command Reference

115
Default command level
1: Monitor level
Parameters
bridge-aggregation: Displays the load sharing criteria of the aggregation group corresponding to the
specified Layer 2 aggregate interface.
route-aggregation: Displays the load sharing criteria of the aggregation group corresponding to the
specified Layer 3 aggregate interface.
interface-number: Specifies an existing aggregate interface number. The value range for this argument is
1 to 1024.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
To display the global link-aggregation load sharing criteria, run the command without the interface
keyword.
To display all group-specific load sharing criteria, run the command with the interface keyword, but do
not specify a particular interface.
To display the load sharing criteria of a particular aggregation group, perform the command with the
aggregate interface specified.
The bridge-aggregation or route-aggregation keyword becomes available only after you create Layer 2
or Layer 3 aggregate interfaces on the device.
Examples
# Display the default global link-aggregation load-sharing criteria.
<Sysname> display link-aggregation load-sharing mode
Link-Aggregation Load-Sharing Mode:
Layer 2 traffic: destination-ip address, source-ip address,
destination-port, source-port,
ip-protocol
Layer 3 traffic: destination-ip address, source-ip address,
destination-port, source-port,
ip-protocol
# Display the configured global link-aggregation load-sharing criteria.
<Sysname> display link-aggregation load-sharing mode
Link-Aggregation Load-Sharing Mode:
destination-ip address, source-ip address
# Display the default link-aggregation load sharing criteria of the aggregation group corresponding to
Layer 2 aggregate interface Bridge-Aggregation 10.
<Sysname> display link-aggregation load-sharing mode interface bridge-aggregation 10
Layer 2 traffic: destination-ip address, source-ip address,