HP VPN Firewall Appliances High Availability Command Reference

116
destination-port, source-port,
ip-protocol
Layer 3 traffic: destination-ip address, source-ip address,
destination-port, source-port,
ip-protocol
# Display the configured link-aggregation load sharing criteria of the aggregation group corresponding
to Layer 2 aggregate interface Bridge-Aggregation 10.
<Sysname> display link-aggregation load-sharing mode interface bridge-aggregation 10
Bridge-Aggregation10 Load-Sharing Mode:
destination-ip address, source-ip address
Table 27 Command output
Field Descri
p
tion
Link-Aggregation Load-Sharing
Mode
Global link-aggregation load sharing criteria.
• By default, the link-aggregation load sharing criteria for Layer 2 traffic
and Layer 3 traffic are displayed.
• If you have configured the global link-aggregation load sharing
criteria, the configured ones are displayed.
Bridge-Aggregation10
Load-Sharing Mode
Link-aggregation load sharing criteria of the aggregation group
corresponding to the aggregate interface Bridge-Aggregation 10.
• By default, the global link-aggregation load sharing criteria are
displayed.
• If you have configured link-aggregation load sharing criteria
especially for this aggregation group, the configured ones are
displayed.
Route-Aggregation10
Load-Sharing Mode
Link-aggregation load sharing criteria of the aggregation group
corresponding to aggregate interface Route-Aggregation 10.
• By default, the global link-aggregation load sharing criteria are
displayed.
• If you have configured link-aggregation load sharing criteria
especially for this aggregation group, the configured ones are
displayed.
Layer 2 traffic: destination-ip
address, source-ip address
Default link-aggregation load sharing criteria for Layer 2 traffic. In this
sample output, the criteria are the source and destination IP addresses of
packets.
Layer 3 traffic: destination-ip
address, source-ip address
Default link-aggregation load sharing criteria for Layer 3 traffic. In this
sample output, the criteria are the source and destination IP addresses of
packets.
destination-ip address, source-ip
address
User-configured link-aggregation load sharing criteria. In this sample
output, the criteria are the source and destination IP addresses of packets.
display link-aggregation member-port
Use display link-aggregation member-port to display detailed link aggregation information for the
specified member ports. If no port is specified, this command displays detailed link aggregation
information for all member ports.