HP VPN Firewall Appliances High Availability Command Reference

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module

121

122

123

124

125

126

127

128

129

130

121

Usage guidelines

To display the information about a specific Layer 2 or Layer 3 aggregation group, use the display

link-aggregation verbose bridge-aggregation interface-number or display link-aggregation verbose

route-aggregation interface-number command.

To display the information about all Layer 2 or Layer 3 aggregation groups, use the display

link-aggregation verbose bridge-aggregation or display link-aggregation verbose route-aggregation

command.

To display the information about all aggregation groups, use the display link-aggregation verbose

command.

The bridge-aggregation or route-aggregation keyword is available only when you create Layer 2 or

Layer 3 aggregate interfaces on the device.

Examples

# Display detailed information about the aggregation group corresponding to Layer 2 aggregate

interface Bridge-Aggregation 10, which is a dynamic aggregation group.

<Sysname> display link-aggregation verbose bridge-aggregation 10

Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing

Port Status: S -- Selected, U -- Unselected

Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,

D -- Synchronization, E -- Collecting, F -- Distributing,

G -- Defaulted, H -- Expired

Aggregation Interface: Bridge-Aggregation10

Aggregation Mode: Dynamic

Loadsharing Type: Shar

System ID: 0x8000, 000f-e267-6c6a

Local:

Port Status Priority Oper-Key Flag

-------------------------------------------------------------------------------

GE0/2 S 32768 2 {ACDEF}

GE0/3 S 32768 2 {ACDEF}

Remote:

Actor Partner Priority Oper-Key SystemID Flag

-------------------------------------------------------------------------------

GE0/2 32 32768 2 0x8000, 000f-e267-57ad {ACDEF}

GE0/3 26 32768 2 0x8000, 000f-e267-57ad {ACDEF}