HP VPN Firewall Appliances High Availability Command Reference

126
Parameters
system-priority: Specifies the LACP priority of the local system, in the range of 0 to 65535. The smaller the
value, the higher the system LACP priority.
Examples
# Set the system LACP priority to 64.
<Sysname> system-view
[Sysname] lacp system-priority 64
link-aggregation load-sharing mode
Use link-aggregation load-sharing mode to configure the global or group-specific link-aggregation load
sharing criteria.
Use undo link-aggregation load-sharing mode to restore the default setting.
Syntax
link-aggregation load-sharing mode { { destination-ip | destination-port | ip-protocol | source-ip |
source-port } * | per-packet }
undo link-aggregation load-sharing mode
Default
The device performs load sharing based on the five-tuple (source IP address, destination IP address,
source port, destination port, and protocol).
Views
System view, Layer 2 aggregate interface view, Layer 3 aggregate interface view
Default command level
2: System level
Parameters
destination-ip: Performs load sharing in link aggregation groups based on destination IP address.
destination-port: Performs load sharing in link aggregation groups based on destination port.
ip-protocol: Performs load sharing in link aggregation groups based on protocol type.
per-packet: Performs per-packet load sharing in link aggregation groups.
The following matrix shows the per-packet keyword and hardware compatibility:
Hardware Com
p
atibilit
y
F1000-A-EI/F1000-S-EI No
F1000-E No
F5000 Yes
F5000-S/F5000-C No
VPN firewall modules No
20-Gbps VPN firewall modules No
source-ip: Performs load sharing in link aggregation groups based on source IP address.