HP VPN Firewall Appliances High Availability Command Reference

128
link-aggregation port-priority
Use link-aggregation port-priority to set the aggregation priority of a port.
Use undo link-aggregation port-priority to restore the default setting.
Syntax
link-aggregation port-priority port-priority
undo link-aggregation port-priority
Default
The aggregation priority of a port is 32768.
Views
Ethernet interface view
Default command level
2: System level
Parameters
port-priority: Specifies a port aggregation priority in the range of 0 to 65535. The smaller the value, the
higher the port aggregation priority.
Usage guidelines
When the number of ports eligible for becoming Selected ports exceeds the maximum number of
Selected ports allowed in an aggregation group, changing the aggregation priority of a port might
affect the aggregation state of the ports in the aggregation group.
Examples
# Set the aggregation priority of port GigabitEthernet 0/1 to 64.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] link-aggregation port-priority 64
link-aggregation selected-port maximum
Use link-aggregation selected-port maximum to configure the maximum number of Selected ports
allowed in an aggregation group.
Use undo link-aggregation selected-port maximum to restore the default.
Syntax
link-aggregation selected-port maximum number
undo link-aggregation selected-port maximum
Default
The maximum number of Selected ports allowed in an aggregation group depends on the hardware
capabilities of the member ports.
Views
Layer 2 aggregate interface view, Layer 3 aggregate interface view