HP VPN Firewall Appliances High Availability Command Reference

134
Interface backup commands
The following matrix shows the feature and hardware compatibility:
Hardware Com
p
atibilit
y
F1000-A-EI/F1000-S-EI Yes
F1000-E Yes
F5000 Yes
F5000-S/F5000-C Yes
VPN firewall modules Yes
20-Gbps VPN firewall modules No
display standby flow
Use display standby flow to display statistics about traffic on the active interfaces participating in load
balancing.
Syntax
display standby flow [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display statistics about the traffic on the active interface participating in load balancing.
<Sysname> display standby flow
Interfacename : GigabitEthernet0/1
Flow-interval(s) : 100
LastInOctets : 868168
LastOutOctets : 1818667
InFlow(Octets) : 50070
OutFlow(Octets) : 100088