HP VPN Firewall Appliances High Availability Command Reference

135
BandWidth(b/s) : 9000
UsedBandWidth(b/s) : 8000
Table 31 Command output
Field Descri
p
tion
Interfacename Name of the active interface.
Flow-interval(s) Intervals for checking traffic on the active interface.
LastInOctets Sum of the octets received on the active interface until the last check.
LastOutOctets Sum of the octets sent on the active interface until the last check.
InFlow(Octets) Sum of the octets received on the active interface during the last interval.
OutFlow(Octets) Sum of the octets sent on the active interface during the last interval.
BandWidth(b/s) Bandwidth of the active interface.
UsedBandWidth(b/s)
Actual bandwidth for the active interface participating in load balancing
during the last interval.
display standby state
Use display standby state to display the state information of the active and standby interfaces.
Syntax
display standby state [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display the state information of the active and standby interfaces.
<Sysname> display standby state
Interface Interfacestate Standbystate Standbyflag Pri Loadstate
GigabitEthernet0/1 UP MUP MUD TO-HYPNOTIZE
GigabitEthernet0/2 STANDBY STANDBY BU 30
GigabitEthernet0/3 STANDBY STANDBY BU 20
Backup-flag meaning: