HP VPN Firewall Appliances High Availability Command Reference

141
Default
The interval for checking the traffic size on the active interface is 30 seconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies flow check interval in the range of 30 to 600 seconds.
Usage guidelines
Use this command after standby interfaces are specified.
Examples
# Configure load balancing, backup bandwidth and flow check interval on interface GigabitEthernet
0/1 as 60 seconds.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] standby timer flow-check 60
Related commands
standby interface
standby timer startup
Use standby timer startup to set the delay timer for the backup function to take effect on system startup.
Use undo standby timer startup to restore the default.
Syntax
standby timer startup seconds
undo standby timer startup
Default
The backup function takes effect after a delay of 30 seconds.
Views
System view
Default command level
2: System level
Parameters
seconds: Specifies the delay timer for the backup function to take effect on system startup, in the range
of 0 to 65535 seconds.
Usage guidelines
This command takes effect on all standby interfaces operating in active/backup mode, and does not take
effect on the standby interfaces operating in load balancing mode.